PPHD123 CNC Hydraulic Press Plate Plate Punching and Driling Machine
| MAYA | Shayga | Halbeegga | ||
| 1 | Awoodda feerka | 1500KN | ||
| 2 | Cabbirka saxanka ugu badan | 1500×775mm | ||
| 3 | Kala duwanaanta dhumucda saxanka | 5 ilaa 25 | ||
| 4 | Modul | Tirada feerka iyo calaamadayntu way dhimataa | 3 | |
| 5 | Awooda farsamaynta | Dhexroor feerka ugu badan | φ30mm | |
| Q345 steel, σ B ≤ 610mpa, φ 30*25mm (dhexroor* dhumucdiisuna) Q420 steel, σ B ≤ 680mpa, φ 26*25mm (dhexroor* dhumucdiisuna) | ||||
| 6 | Awood calaamadaynta | Awood calaamadaynta | 800KN | |
| Cabirka jilayaasha | 14×10mm | |||
| 7 | Tirada xarfaha horgalayaasha koox ahaan | 10 | ||
| 8 | Margin daloolka ugu yar | 25mm | ||
| 9 | Tirada xajinta | 2 | ||
| 10 | Cadaadiska nidaamka | Cadaadis sare | 24Mpa | |
| Cadaadis hoose | 6Mpa | |||
| 11 | Cadaadiska hawada | 0.5Mpa | ||
| 12 | Awoodda matoorka ee bamka Haydarooliga | 22KW | ||
| 13 | Tirada faashash CNC | 2 | ||
| 14 | X. Xawaaraha dhidibka Y | 18m/daqiiqo | ||
| 15 | X-axis servo awoodda motor | 2KW | ||
| 16 | dhidibka Y-servo awoodda motor | 2KW | ||
| 17 | Habka qaboojinta | Biyo qaboojin | ||
| 18 | Awoodda guud | 26KW | ||
| 19 | Cabirka mishiinka (L*W*H) | 3650*2700*2350mm | ||
| 20 | Miisaanka mashiinka | 9500Kg | ||
1. Mashiinka feerka hydraulic PPHD123 CNC wuxuu leeyahay xoog feeray ilaa 1200KN.Waxay leedahay saddex boos oo dhinta waxaana lagu rakibi karaa saddex qaybood oo feedh ah, ama laba qaybood oo feeray ayaa dhinta iyo santuuqa dabeecadda.Dhimashadu way fududahay in la beddelo oo daabacadu waa caddahay.
2. Lagu qalabeeyay madaxa awoodda qodista ee CNC, kaas oo qabata mato beddelka soo noqnoqda dunta dunta gaarka ah oo ah nooca culayska xooggan, iyo matoorku waxa uu wadaa dunta qodista si uu ugu wareego suunka isku midka ah.Matoorka servo wuxuu wadaa quudinta madaxa tamarta qodista ee CNC, iyo hore u socodka, horumarinta shaqada iyo rogida dhaqsaha badan waxaa gacanta ku haya nidaamka CNC oo si toos ah loo dhamaystiray.
3. Mashiinku wuxuu leeyahay laba faashadood oo CNC ah: dhidibka X waa dhaqdhaqaaqa bidix iyo midig ee xajinta, dhidibka Y waa dhaqdhaqaaqa hore iyo gadaal ee xajinta, iyo shaqada CNC-ga adag ee adag waxay hubisaa kalsoonida iyo saxnaanta quudinta.
4. Labada faasas ee X iyo Y waxay isticmaalaan hagitaan toosan oo toosan, kuwaas oo leh culeys weyn, saxsanaan sare, nolol dheer oo hagayaasha, waxayna ilaalin karaan saxnaanta sare ee mashiinka wakhti dheer.
5. Isticmaal isku-darka saliidda dhexe iyo saliidda la qaybiyey si aad u saliiddo mashiinka, si mashiinku had iyo jeer u yahay xaalad shaqo oo wanaagsan.
6. Saxanka waxaa lagu dhejiyaa laba xabbo oo biyo ah oo xoog badan waxayna si degdeg ah ugu dhaqaaqdaa meelaynta.
7. Nidaamka xakamaynta wuxuu qaataa Siemens nidaamka CNC ee ugu dambeeyay SINUMERIK 808D ama Yokogawa PLC, oo leh kalsooni sare, ogaanshaha habboon iyo qalliin fudud.
8. Saxanka waa la farsameeyaa oo si degdeg ah loo meeleeyaa, fududahay in la shaqeeyo, raad yar, iyo waxtarka wax soo saarka sare.
| MAYA | Magaca | Summada | Dalka |
| 1 | Xadiidka hagaha toosan | HIWIN/PMI | Taiwan (Shiinaha) |
| 2 | Bamka saliidda | Albert | USA |
| 3 | Waalka gargaarka elektromagnetic | Atoos | Talyaaniga |
| 4 | Waalka dajinta korantada | Atoos | Talyaaniga |
| 5 | Solenoid valve | Atoos | Talyaaniga |
| 6 | Hal jid oo ceejinta | Atoos | Talyaaniga |
| 7 | P-dekedda ceejinta | CALAAMAD | Taiwan (Shiinaha) |
| 8 | P port check valve | CALAAMAD | Taiwan (Shiinaha) |
| 9 | Kontoroolka Haydarooliga | CALAAMAD | Taiwan (Shiinaha) |
| 10 | Silsilad jiid | JFLO | Shiinaha |
| 11 | Waalka hawada | CKD/SMC | Japan |
| 12 | Isku dhafka | CKD/SMC | Japan |
| 13 | Silinder | CKD/SMC | Japan |
| 14 | FRL | CKD/SMC | Japan |
| 15 | AC servo motor | Panasonics | Japan |
| 16 | PLC | Mitsubishi | Japan |
Fiiro gaar ah: Kan sare waa alaab-qeybiye go'an.Waxay ku xiran tahay in lagu beddelo qaybo tayo leh oo sumad kale ah haddii alaab-qeybiyaha sare aanu keeni karin qaybaha haddii ay dhacdo arrin gaar ah.
Shirkaddayadu waxay samaysaa mashiinnada CNC si ay uga baaraandegaan walxaha birta ee kala duwan, sida profiles bar xagasha, kanaalka H alwaax/U iyo taarikada birta.
| Nooca Ganacsiga | Soo saaraha, Shirkadda Ganacsiga | Dalka / Gobolka | Shandong, Shiinaha |
| Alaabooyinka Muhiimka ah | Khadka xagasha ee CNC/Mashiinka wax qodista ee saxanadda CNC/CNC | Lahaanshaha | Milkiilaha Gaarka ah |
| Wadarta guud ee shaqaalaha | 201 - 300 oo qof | Wadarta Dakhliga Sannadka | Qarsoodi |
| Sanadka La asaasay | 1998kii | Shahaadooyinka (2) | |
| Shahaadooyinka Alaabta | - | Shatiyada (4) | |
| Calaamadaha ganacsiga (1) | Suuqyada Waaweyn |
|
| Cabbirka Warshada | 50,000-100,000 mitir oo laba jibbaaran |
| Dalka/Gobolka Warshada | No.2222, Waddada Century, Aagga Horumarinta Farsamada Sare, Magaalada Jinan, Gobolka Shandong, Shiinaha |
| Tirada Khadadka Wax-soo-saarka | 7 |
| Wax-soo-saarka Qandaraaska | Adeegga OEM La Bixiyay, Adeeg Naqshad La Bixiyay, Summada Iibsadaha La Bixiyay |
| Qiimaha Wax-soo-saarka Sannadlaha ah | US$10 Million – US$50 Million |
| Magaca Alaabta | Awoodda Khadka Wax-soo-saarka | Cutubyo Dhab ah oo La Soo Saaray (Sannadkii Hore) |
| Khadka xagasha CNC | 400 Set/Sannad | 400 Xadhig |
| CNC Beam Drilling Machine | 270 Set/Sannad | 270 Habayn |
| CNC Plate Drilling Machine | 350 Set/Sannad | 350 Habayn |
| CNC Plate Punching Machine | 350 Set/Sannad | 350 Habayn |
| Luuqada lagu hadlo | Ingiriis |
| Tirada shaqaalaha ee Waaxda Ganacsiga | 6-10 Qof |
| Celceliska Waqtiga Hogaaminta | 90 |
| Dhoofinta Diiwaangelinta Shatiga NO | 04640822 |
| Wadarta Dakhliga Sannadka | qarsoodi ah |
| Wadarta Dakhliga Dhoofinta | qarsoodi ah |
Qaybaha alaabta
-
PH1610A CNC Mashiinka qodista Xawaaraha Sare ee Shee...
-
PP123 Mashiinka feerka Haydarooliga ee CNC
-
PP103B CNC Birta Dhismaha Taarikada Haydarooliga P...
-
PPHD153 Cnc Saxan Saaneedka Haydarooliga ah iyo ...
-
PP153 CNC Hydraulic Press Plate Machine Punching Machine
-
CNC Hudraulic Punching and Drilling Machine
